THE TECH BEHIND YOUR GEOBUBBLE™ SOLAR COVER

Here in Skordis Hydrodynamics Ltd, we keep innovating by providing the best accessories for your Geobubble™ Solar Cover to further improve the customer experience when installing and operating the cover. All of our covers should be installed with the bubbles facing into the water as shown in the diagrams. The unique profile of the GeoBubble™ technology air cells provide both buoyancy and an insulative air gap to control heat transfer enabling the swimming pool cover material to manage the pool environment and keep the pool at the desired temperature.

Let’s begin by showing you the different models and how their respective technologies work:

1. Geobubble™ Light Blue – 400microns


The value for money model, which reduces evaporation by over 98% resulting in the preservation of the water resources and increased temperatures within the swimming pool, saving water and preventing evaporative cooling. It also prevents dirt, leaves, insects and other debris from entering the pool, maintaining a clean, pleasant swimming environment and reducing chemical demand.

Transmission Profile of Geobubble™ Light Blue – 400microns showcasing the correct way(bubbles touching the water surface) to install your cover.

Spider Chart of the Geobubble™ Light Blue – 400microns showcasing its performance against 10 important performance metrics, allowing for comparison between our different models.


2. Geobubble™ SOL&GUARD 500 microns


The best selling model in our product range , which transmits 80% of the sun’s energy in the visual and IR spectrum through the material to heat the water in the swimming pool. Sol&Guard’s main advantage over Geobubble™ Light Blue – 400microns is that it performs much better at the heat retention aspect. It has been seen to increase pool temperatures by up to 8°C above the ambient pool temperature, reducing the heating demand by up to 70%. Evaporation is reduced by over 98%, resulting in the preservation of the water resources and increased temperature within the swimming pool. It also prevents dirt, leaves, insects and other debris from entering the pool, maintaining a clean, pleasant swimming environment and reducing chemical demand.

Transmission Profile of the Geobubble Sol&Guard – 500microns showcasing the correct way(bubbles touching the water surface) to install your cover.

Spider Chart of the Geobubble Sol&Guard – 500microns showcasing its performance against 10 important performance metrics, allowing for comparison between our different models.


3. Geobubble™ Energy Guard 500 microns


The most accomplished model in our product range, which uses a patented midnight blue pigment combination giving the material its selective transmission properties. The pigment formulation works as a selective filter absorbing the visible wavelengths responsible for photosynthesis. This absorbed energy is passed to the pool through conduction, while the transmission properties of the bubble layer allows for Infrared radiation (IR) wavelengths to pass through the material and be directly absorbed by the water. It also helps maintain a pleasant, warm swimming environment by using light filtration technology to absorb the wavelengths that promote the growth of algae, reducing the cost and time spent on maintenance. Evaporation is reduced by over 98%, resulting in the preservation of the water resources and increased temperature within the swimming pool.

Transmission Profile of the Geobubble™ Energy Guard 500microns showcasing the correct way(bubbles touching the water surface) to install your cover.

Spider Chart of the Geobubble™ Energy Guard 500microns showcasing its performance against 10 important performance metrics, allowing for comparison between our different models.

A better way to cover..

Add Comment

Your email address will not be published. Required fields are marked *

FREE SHIPPING OVER €100
DELIVERY IN 7 WORKING DAYS
SECURE PAYMENT (3 METHODS)